Prima 3/8 NPT Quick Connect Coupler Female Stainless Steel - MTM Veloci - USA
Prima 3/8 NPT Quick Connect Coupler Female Stainless Steel Veloci’s American-made Prima quick connects are made of the highest quality American stainless-steel. 100% machined from round bar stock at our manufacturing facility in Minnesota. What makes PRIMA better than the rest?303 stainless-steel sourced from the City of Steel - Pittsburgh, PA USA100% machined to precise specifications: +/- 127µm, +/- 1º on working angular surfaces3x more precise than the competition; precision means better fit and longer lifeQuality controlled by digital comparatorDe-burred and washed for premium polish and smoothest action in the industryEPDM seals for high temperature and chemical tolerance Stainless-steel fittings offer anti-corrosive properties and reliable performance. They are commonly found at all joints where high pressure fluid may need to be disconnected after use. Other areas such as lances, tips, and foam cannons are convenient places to install these QC's. As a rule of thumb, Veloci’s 3/8" fittings are normally found between the pump and the spray gun where 3/8" hose is commonly used. When purchasing plugs and couplers the male fitting has exposed threads while the female fitting has threads on the interior of the fitting. See image for reference. All Veloci fittings are National Pipe Thread (NPT) which means they have a tapered male or female thread (depending upon the model). NPT is mainly used in North America and was developed on the concept of interference by the third thread. When installing NPT fittings to another NPT thread we recommend that you use 4-5 wraps of Teflon tape wound clockwise, or 2-3 drops of Loctite thread sealant. When installing NPT , use 6-7 wraps of Teflon or 2-3 drops of Loctite and tighten accordingly. When tightening opposing thread (NPT) you will experience more interference sooner and you will not be able to tighten the fitting as far as like-threads, but will still have a tight seal, just make sure to use the recommended amount of Teflon tape or Loctite.
Specifications
| All Returns Accepted | ReturnsNotAccepted |
| Brand | MTM |
| Model | Prima Veloci |
| MPN | 56.0063 |
Prima 3/8 NPT Quick Connect Coupler Female Stainless Steel Veloci’s American-made Prima quick connects are made of the highest quality American stainless-steel. 100% machined from round bar stock at our manufacturing facility in Minnesota. What makes PRIMA better than the rest?303 stainless-steel sourced from the City of Steel – Pittsburgh, PA USA100% machined to precise specifications: +/- 127µm, +/- 1º on working angular surfaces3x more precise than the competition; precision means better fit and longer lifeQuality controlled by digital comparatorDe-burred and washed for premium polish and smoothest action in the industryEPDM seals for high temperature and chemical tolerance Stainless-steel fittings offer anti-corrosive properties and reliable performance. They are commonly found at all joints where high pressure fluid may need to be disconnected after use. Other areas such as lances, tips, and foam cannons are convenient places to install these QC’s. As a rule of thumb, Veloci’s 3/8″ fittings are normally found between the pump and the spray gun where 3/8″ hose is commonly used. When purchasing plugs and couplers the male fitting has exposed threads while the female fitting has threads on the interior of the fitting. See image for reference. All Veloci fittings are National Pipe Thread (NPT) which means they have a tapered male or female thread (depending upon the model). NPT is mainly used in North America and was developed on the concept of interference by the third thread. When installing NPT fittings to another NPT thread we recommend that you use 4-5 wraps of Teflon tape wound clockwise, or 2-3 drops of Loctite thread sealant. When installing NPT , use 6-7 wraps of Teflon or 2-3 drops of Loctite and tighten accordingly. When tightening opposing thread (NPT) you will experience more interference sooner and you will not be able to tighten the fitting as far as like-threads, but will still have a tight seal, just make sure to use the recommended amount of Teflon tape or Loctite.
