General Pump 100774 Pressure Washer Detergent Chemical Injector 3/8" NPT-M 1.8mm
General Pump high draw downstream fixed chemical injector with a 1.8mm orifice. This injector features up to 20% injection draw rate for a cost effective solution to your chemical application needs. Made in the USA. Specifications:Maximum Pressure: 4500 PSIFlow Range: 2-3 GPMInlet Port: 3/8" NPT-MOutlet Port: 3/8" NPT-MChemical Port: 1/4" Hose BarbMax Temperature: 190°FDimensions: 2.2" x 1.15" 1.9"Weight: 0.4 lb.Materials of Construction: Brass, Stainless Steel, VitonInstallation Notes:This product is to be used with clean, fresh water. For different or corrosive liquids, contact GP Technical Service Department. With not clean liquids, appropriate filtration should be installed. Select the injector based on the nominal operating rating: system rated pressure, max flow and max temperature. Install valve with direction arrow pointing downstream. For proper operation a control device such as a dual lance wand, quick couple nozzles, or an adjustable nozzle holder must be used to lower the system pressure at the nozzle. Under no circumstances should the pressure of the system exceed the maximum rated pressure of any component.
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Brand | General Pump |
| MPN | 100774 |
| Country/Region Of Manufacture | United States |
General Pump high draw downstream fixed chemical injector with a 1.8mm orifice. This injector features up to 20% injection draw rate for a cost effective solution to your chemical application needs. Made in the USA. Specifications:Maximum Pressure: 4500 PSIFlow Range: 2-3 GPMInlet Port: 3/8″ NPT-MOutlet Port: 3/8″ NPT-MChemical Port: 1/4″ Hose BarbMax Temperature: 190°FDimensions: 2.2″ x 1.15″ 1.9″Weight: 0.4 lb.Materials of Construction: Brass, Stainless Steel, VitonInstallation Notes:This product is to be used with clean, fresh water. For different or corrosive liquids, contact GP Technical Service Department. With not clean liquids, appropriate filtration should be installed. Select the injector based on the nominal operating rating: system rated pressure, max flow and max temperature. Install valve with direction arrow pointing downstream. For proper operation a control device such as a dual lance wand, quick couple nozzles, or an adjustable nozzle holder must be used to lower the system pressure at the nozzle. Under no circumstances should the pressure of the system exceed the maximum rated pressure of any component.
